GUIDE TO FLASH CONDOR M2 SP617
MT6757 TESTED FIRMWARE
VIA MTK FLASHTOOL

PRE-REQUISITE
  • This is for Condor M2 only.
  • Your device must have 70% Of battery.
  • You need a Laptop or PC to perform this Action.
  • Download the right firmware for Condor M2  from the link bellow.
  • Make sure you have followed the steps properly. Don’t Skip and Read!
  • We are not responsible for any damage that you make to your Phone.


WHY YOU NEED TO FLASH YOUR PHONE!!
You need this firmware/stock rom if you have encountered this kind of problem in your Smartphone Listed Below:
1.Hang on logo.
2.Rebooting.
3.Bootloop & Dead boot after a wrong software.
4-Virus & Sexual Apps.
5-System crashing
How to know if the phone had a hard problem (Emmc problem)??
  • What is Emmc problem? also called read mode only,  it means that your internal memory doesnt accept command, so the phone stay on the same condition after a software or a hard reset.
  •  if the phone hang on logo after flash, you ara facing Emmc problem.
  • As a precaution you shouldn't change setting in SP flashtool from Download only to format+download, you will end with a dead phone if you have a Emmc problem ofcourse.
REMARQUE:

MAKE BACKUP BEFORE FLASH



DOWNLOAD AREA:


FIRMWARE DOWNLOAD LINK: FROM HERE

password: www.freemobilefirmware.com

SP Flashtool Downloadlink: SPFlashTool 5.1744

Drivers Download Link: Mobile Mtk Drivers