CONDOR GRIFFE T1 SP413 ANDROID 7.0 SPD FLASHTOOL FACTORY FIRMWARE
INFO:

  • Model Name  : Griffe_T1
  • Model Brand : Condor
  • Model Device: Griffe_T1
  • AndrVersion : 7.0
  • BaseBand CPU: SP9832A_2H11_VOLTE
  • Project Ver : SP413_V12_20170801
  • Model Ext   : SP413
PRE-REQUISITE
  • This is for Condor T1 only.
  • Your device must have 70% Of battery.
  • You need a Laptop or PC to perform this Action.
  • Download the right firmware for G-Tide V5 from the link bellow.
  • Back Up your Data to make sure you have data’s in case if something Wrong (This Process won’t loose your data)
  • Make sure you have followed the steps properly. Don’t Skip and Read!
  • We are not responsible for any damage that you make to your Phone.

WHY YOU NEED TO FLASH YOUR PHONE!!

You need this firmware/stock rom if you have encountered this kind of problem in your Smartphone Listed Below:

  • Hang on logo.
  • Rebooting.
  • Bootloop & Dead boot after a wrong software.
  • Virus & Sexual Apps.
  • System crashing
How to know if the phone had a hard problem (Emmc problem)??
  • What is Emmc problem? also called read mode only,  it means that your internal memory doesnt accept command, so the phone stay on the same condition after a software or a hard reset.
  •  if the phone hang on logo after flash, you ara facing Emmc problem.
DOWNLOAD AREA:
Firmware Download Link: FROM HERE
Password For Firmware: www.dzgsm.com
SPD Flashtool Downloadlink: SPD FlashTool ResearchDownload
Drivers Download Link: Mobile SPD Drivers
How To Install Spd Drivers manually: FROM HERE