GUIDE TO FLASH CONDOR L1 SP622
EXCLUSIVE TESTED FIRMWARE
VIA MTK FLASHTOOL
Guide To Flash Condor L1 SP622 Nougat 7.0 Tested Firmware Via Flashtool

INFO:
 Build ID: NRD90M
 Display ID: SP622_V6_20171221
 Version: 7.0
 Build Date: 2017年 12月 21日 星期四 12:04:14 CST
 Model: Plume L1
 Brand: Condor
 Device: SP622
 Manufacturer: SPA Condor Electronics
 Mediatek Version Release: SP622_V6

PRE-REQUISITE
  • This is for Condor L1 only.
  • Your device must have 70% Of battery.
  • You need a Laptop or PC to perform this Action.
  • Download the right firmware for Condor L1 from the link bellow.
  • Make sure you have followed the steps properly. Don’t Skip and Read!
  • We are not responsible for any damage that you make to your Phone.


conodr l1 sp622 nougat 7.0

WHY YOU NEED TO FLASH YOUR PHONE!!

You need this firmware/stock rom if you have encountered this kind of problem in your Smartphone Listed Below:
1.Hang on logo.
2.Rebooting.
3.Bootloop & Dead boot after a wrong software.
4-Virus & Sexual Apps.
5-System crashing
How to know if the phone had a hard problem (Emmc problem)??
  • What is Emmc problem? also called read mode only,  it means that your internal memory doesnt accept command, so the phone stay on the same condition after a software or a hard reset.
  •  if the phone hang on logo after flash, you ara facing Emmc problem.
  • As a precaution you shouldn't change setting in SP flashtool from Download only to format+download, you will end with a dead phone if you have a Emmc problem ofcourse.
REMARQUE:
MAKE BACKUP BEFORE FLASH



DOWNLOAD AREA:

FIRMWARE DOWNLOAD LINK: FROM HERE

password: www.freemobilefirmware.com

SP Flashtool Downloadlink: SPFlashTool 5.1744

Drivers Download Link: Mobile Mtk Drivers

How To Install Spd Drivers manually: FROM HERE